2-5
Cisco Physical Security Multiservices Platform Series User Guide
OL-21838-03
Chapter 2 Setting Up and Maintaining the Multiservices Platform Series Device
Setting up a Multiservices Platform Series Device
Installing Square Hole to Round Hole Adapters (Optional)
The quick release mounting system on the Multiservices Platform Series 2-RU model is designed for
racks with square holes. If you want to use this system with a round hole rack or a threaded hole rack
(with thread size M5 or larger), you can do so by using the square hole to round hole adapter set. This
set includes four brackets, which attach to the front and rear of the right and left rack rails and provide
square holes to which you can attach the quick release rack rails.
To install the square hole to round hole adapters, see
and perform the procedure that follows.
This figure shows how the brackets and rails attach to the left side of a rack.
Figure 2-2
Attaching Square Hole to Round Hole Adapters
Procedure
Step 1
Identify the two brackets that are labeled A and take these actions for each bracket:
a.
Place one of the brackets inside of the rack and align the holes in the bracket with the holes on the
front of the rack at the height where you want to install the Multi Service Platform.
Make sure that the “Inward” stamp on the bracket faces toward the inside of the rack.
b.
Attach the bracket to the rack using two M5 x 12 screws, provided.
Drive the screws through the rack and then into the bracket. Make sure to securely tighten the
screws.
1
Left front of rack
5
Rear bracket, labeled B
2
Front bracket, labeled A
6
Left rear of rack
3
Front of left rack rail
7
M5 x 12 screws for securing adapters
4
Rear of left rack rail
8
Inward stamp, must be facing inward
277796
A
B
INW
A
RD
INW
A
RD
1
2
3
8
8
4
5
6
7
7
