Configuring Call Handling
How to Configure Cisco Unified SIP SRST
164
Cisco Unified SCCP and SIP SRST System Administrator Guide
OL-13143-04
How to Configure Cisco Unified SIP SRST
This section contains the following procedures:
•
Configuring SIP Phone Features, page 164
(optional)
•
Configuring SIP-to-SIP Call Forwarding, page 166
(required)
•
Configuring Call Blocking Based on Time of Day, Day of Week, or Date, page 168
(required)
•
SIP Call Hold and Resume, page 172
(no configuration necessary)
•
Examples, page 172
Configuring SIP Phone Features
After a voice register pool has been set, this procedure adds optional features to increase functionality.
Some features can be made per pool or globally.
In
voice register pool
configuration, you can now configure several new options per pool (a pool can be
one phone or a group of phones). There is also a new
voice register global
configuration mode for
Cisco Unified SIP SRST. In
voice register global
mode, you can globally assign characteristics to
phones.
SUMMARY STEPS
1.
enable
2.
configure
terminal
3.
voice register global
tag
4.
max-pool
max-voice-register-pools
5.
application
application-name
6.
external ring
{
bellcore-dr1
|
bellcore-dr2
|
bellcore-dr3
|
bellcore-dr4
|
bellcore-dr5
}
7.
exit
8.
voice register pool
tag
9.
no vad
10.
codec
codec-type
[
bytes
]
11.
end
