Cisco Content Delivery Engine 100/200/300/400, Руководство по установке оборудования

Страница: 46 / 108

3-6
Cisco Content Delivery Engine 100/200/300/400 Hardware Installation Guide
OL-13478-03
Chapter 3 Installing the Content Delivery Engines
Installing the CDEs
Connecting Power Cords
Redundant power connectors are located at the rear of the chassis as shown in Figure 3-2 through
Figure 3-5 . Power connections have the following properties:
• Chassis power inlets accept AC (120V or 220V) or –48 VDC.
• The CDE100 chassis contains one VAC power port; the CDE200 chassis contains two VAC or VDC
power ports; the CDE300 chassis contains three VAC or VDC power ports, and the CDE400 chassis
contains four VAC or VDC power ports. See
Appendix D for information connecting DC Power.
Note All unlabeled ports are unused ports. Do not install cables in any unused ports.
Figure 3-1 CDE100 Connector Locations
Figure 3-2 CDE200 or CDE200 ISV Connector Locations
1 Power connector 5 VGA interface
2
Mouse connector
6
Management interface (eth0)
3
Keyboard connector
7
Ingest interface (eth1)
4 Serial console interface
21
1770
4 5
1 2
3 6 7
1
Power connectors
5
VGA interface
2
Mouse connector
6
Management interface (eth0)
3 Keyboard connector 7 Ingest interface (eth1)
4
Serial console interface
8
Stream interfaces (eth2 through eth5)
21
1771
3 4 5 6 7
2 1
eth4 eth4 eth2 eth2
eth5 eth5 eth3 eth3
8
eth0 eth1