Cisco CompactFlash Adapter, Руководство по установке

Страница: 15 / 34

15
Cisco CompactFlash Adapter for Bootflash Upgrade Installation Note
78-17277-05
Installing the SP Bootflash Memory Upgrade Kit
Step 5
Open the antistatic bag containing the SP CompactFlash adapter.
Note
The SP CompactFlash adapter has a label attached to the CompactFlash identifying it as the SP
CompactFlash adapter.
Step 6
Carefully align the CompactFlash adapter edge connector with the DIMM socket. Slide the
CompactFlash adapter edge connector at an angle into the socket. (See
Figure 6 .)
Note
Make sure that the CompactFlash adapter edge connector is fully inserted into the DIMM socket.
Step 7
Press down firmly on both edges of the CompactFlash adapter until the CompactFlash adapter latches
into place. Visually verify that both locking spring clips are fully engaged over the edges of the
CompactFlash adapter. (See
Figure 6 .)
Figure 6 Installing the CompactFlash Adapter
You are now ready to reinstall the Supervisor Engine 720 into the switch chassis.
144404
SP CompactFlash Adapter
DIMM Socket