Cisco CISCOWORKS COMMON SERVICES 3.0, Руководство пользователя

Страница: 210 / 286

Chapter 6 Using Device Center
Enabling Debugging Tools
6-10
User Guide for CiscoWorks Common Services
78-16571-01
Step 3 From the Functions Available pane, click SNMP Walk.
The SNMP Walk dialog box appears.
Step 4
Enter the IP address or DNS name.
Step 5
For SNMP Version 1 and 2c (if it is a 64-bit counter, use SNMP v2):
•
Enter the Read community string.
•
Enter the starting OID (optional). If this field is left blank, the tool will start
from 1.
•
Enter the SNMP Timeout.
•
Select the check box to get output OIDs numerically.
For SNMP Version 3:
•
Provide the SNMPv3 Username and password
•
Specify the SNMP v3 Auth Protocol. Select either the MD5 radio button or
the SHA radio button.
•
Enter the starting OID (optional). If this field is left blank, the tool will start
from 1.
•
Enter the SNMP Timeout. The default is 10 seconds.
•
Select the check box to get output OIDs numerically.
The fields are case sensitive.
Step 6
Click OK to get the results.
The results will be based on the parameters you entered. When the walk is
complete, you can save it as text. A full walk may take a long time.
If you launch SNMP Walk feature with Network Operator/Help Desk privilege,
device credential fetching fails and the fields of read/write community strings of
SNMP v1/v2c, read/write SNMPv3 credentials are set to default values.
You have to manually enter SNMP v1/v2c/v3 credentials.