background image

Cisco Systems, Inc.

www.cisco.com

 

Cisco Catalyst 2.4 GHz and 5/6 GHz 
Dual-Band Polarization-Diverse Directional 
Patch Antenna (C-ANT9103=)

First Published: 

March 13, 2020

Last Updated: 

April 17, 2020

This document describes the Cisco Catalyst 2.4 GHz and 5/6 GHz Dual-Band Polarization-Diverse 
Directional Patch Antenna (C-ANT9103=), and provides electrical specifications and mounting 
instructions. 

The antenna is an octal DART port polarization-diverse patch antenna that operates over the 2.4 GHz 
band and extended 5 GHz band (up to 7.125 GHz), and IoT. It has 8 RF paths and 16 digital lines. It also 
has an LED. The antenna ships with an articulating mount for use on flat surfaces and masts, and is 
adjustable in both horizontal and vertical planes. 

The antenna is designed for use in indoor and outdoor environments with an approved Cisco Catalyst 
series access point that requires four dual-band and four 5/6 GHz antennas. The antenna also includes 
circuitry to enable self-identification of the antenna by the Cisco Catalyst Series access points.

The following information is provided in this document:

Technical Specifications, page 2

Azimuth and Elevation Radiation Patterns, page 3

Safety Precautions, page 7

Installation Notes, page 8

Contents of the Antenna and Bracket Kit, page 9

Dimensions of the Antenna and Brackets, page 10

Installing the Antenna, page 13

Communications, Services, and Additional Information, page 26

Содержание Catalyst C-ANT9103 Series





























Отзывы: