Purpose
Command or Action
Deletes all or the specified inactive SMU package from the
file system.
install remove
{
file location filename
|
inactive
}
Example:
Step 7
Device# install remove file
flash:cat9k_iosxe.2017-01-10_13.15.1.
CSCxxxxxxx.SSA.dmp.bin
Displays the image version on the device.
show version
Example:
Step 8
Device# show version
Displays information about the active package.
show install summary
Step 9
Example:
• The output of this command varies according to the
install
commands that are configured.
Device# show install summary
Configuration Examples for Software Maintenance Upgrade
Example: Managing an SMU
The following example shows how to copy an SMU file to TFTP:
Device#
copy tftp://172.19.1.250//tftpboot/folder1/
cat9k_lite_iosxe.xx.xx.xx.CSCxxxxxxx.SSA.dmp.bin
tftp:Destination filename [cat9k_lite_iosxe.xx.xx.xx.CSCxxxxxxx.SSA.dmp.bin]?
Accessing tftp://172.19.1.250//auto/tftpboot/folder1/
cat9k_lite_iosxe.xx.xx.xx.CSCxxxxxxx.SSA.dmp.bin...
Loading /auto/tftpboot/folder1/cat9k_lite_iosxe.xx.xx.xx.CSCxxxxxxx.SSA.dmp.bin
from 172.19.1.250 (via GigabitEthernet0): !
[OK - 17668 bytes]
17668 bytes copied in 0.058 secs (304621 bytes/sec)
The following is sample output from the
show install summary
command:
Device#
show install summary
[ Switch 1 ] Installed Package(s) Information:
State (St): I - Inactive, U - Activated & Uncommitted,
C - Activated & Committed, D - Deactivated & Uncommitted
--------------------------------------------------------------------------------
Type St Filename/Version
--------------------------------------------------------------------------------
SMU C flash:cat9k_lite_iosxe.xx.xx.xx.CSCxxxxxxx.SSA.dmp.bin
IMG C xx.x.x.0
The following example shows how to add a maintenance update package file:
Device#
install add file flash:cat9k-
universalk9.2017-01-10_13.15.1.CSCxxxxxxx.SSA.dmp.bin
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
234
Software Maintenance Upgrade
Configuration Examples for Software Maintenance Upgrade