13.
show flow monitor flow-monitor-name cache format record
14.
show flow monitor flow-monitor-name cache format csv
DETAILED STEPS
Purpose
Command or Action
Enters global configuration mode.
configure terminal
Example:
Step 1
Device#
configure terminal
Creates a flow monitor and enters flow monitor
configuration mode.
flow monitor monitor-name
Example:
Step 2
Device(config)#
flow monitor
flow-monitor-1
(Optional) Creates a description for the flow monitor.
description description
Step 3
Example:
Device(config-flow-monitor)#
description
flow-monitor-1
Specifies the name of a record that was created previously.
record record-name
Example:
Step 4
Device(config-flow-monitor)#
record
flow-record-1
Specifies the name of an exporter that was created
previously.
exporter exporter-name
Example:
Step 5
Device(config-flow-monitor)#
exporter
flow-exporter-1
(Optional) Specifies to configure flow cache parameters.
cache
{
entries number-of-entries
|
timeout
{
active
|
inactive
} |
type normal
}
Step 6
•
entries number-of-entries
— Specifies the maximum
number of flow entries in the flow cache in the range
from 16 to 65536.
Example:
Device(config-flow-monitor)#
cache timeout active
1800
Only normal cache type is supported.
Note
Example:
Device(config-flow-monitor)#
cache timeout
inactive 200
Example:
Device(config-flow-monitor)#
cache type normal
Returns to privileged EXEC mode. Alternatively, you can
also press
Ctrl-Z
to exit global configuration mode.
end
Example:
Step 7
Device(config)#
end
Displays information about all the flow monitors.
show flow monitor
Example:
Step 8
Device#
show flow monitor
System Management Configuration Guide, Cisco IOS XE Fuji 16.8.x (Catalyst 9500 Switches)
124
Configuring Application Visibility and Control in a Wired Network
Creating a Flow Monitor
