2-669
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
spanning-tree mst port-priority
spanning-tree mst port-priority
Use the
spanning-tree mst port-priority
interface configuration command to configure an interface
priority. If a loop occurs, the Multiple Spanning Tree Protocol (MSTP) can select which interface to put
in the forwarding state. Use the
no
form of this command to return to the default setting.
spanning-tree
mst
instance-id
port-priority
priority
no spanning-tree mst
instance-id
port-priority
Syntax Description
Defaults
The default is 128.
Command Modes
Interface configuration
Command History
Usage Guidelines
You can assign higher priority values (lower numerical values) to interfaces that you want selected first
and lower priority values (higher numerical values) that you want selected last. If all interfaces have the
same priority value, the multiple spanning tree (MST) puts the interface with the lowest interface number
in the forwarding state and blocks other interfaces.
Examples
This example shows how to increase the likelihood that the port associated with spanning-tree instances
20 and 22 is placed into the forwarding state if a loop occurs:
Switch(config)#
interface gigabitethernet1/0/2
Switch(config-if)#
spanning-tree mst 20,22 port-priority 0
You can verify your settings by entering the
show spanning-tree mst interface
interface-id
privileged
EXEC command.
instance-id
Range of spanning-tree instances. You can specify a single instance, a range of
instances separated by a hyphen, or a series of instances separated by a comma. The
range is 0 to 4094.
priority
The range is 0 to 240 in increments of 16. Valid priority values are 0, 16, 32, 48, 64,
80, 96, 112, 128, 144, 160, 176, 192, 208, 224, and 240. All other values are rejected.
The lower the number, the higher the priority.
Release
Modification
12.1(14)AX
This command was introduced.
12.2(25)SEG
The
instance-id
range changed to 0 to 4094.
