1-5
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 1 Using the Command-Line Interface
Commands Changed in Cisco IOS 12.2(25)EY
The supported commands can vary depending on the version of software in use. To view a
comprehensive list of commands, enter a question mark (
?
) at the prompt.
Switch(config-line)#
?
To exit line configuration mode and to return to global configuration mode, use the
exit
command. To
exit line configuration mode and to return to privileged EXEC mode, enter the
end
command, or press
Ctrl-Z
.
Commands Changed in Cisco IOS 12.2(25)EY
lists describes the commands that have the same function but different syntax than they did in
software releases before Cisco IOS Release 12.2(25)EY.
Table 1-2
Commands Changed
Releases earlier than
Cisco IOS
Release 12.2(25)EY
Cisco IOS
Release 12.2(25)EY or
later
Description
debug autoqos
debug auto qos
Enables debugging of the auto-QoS
1
feature.
1.
auto-QoS = automatic quality of service
xconnect
{
destination
vc-id
}
xconnect
{
destination
vc-id
encapsulation
mpls
}
Routes a Layer 2 packets over a specified
point-to-point virtual connection.
