2-168
Catalyst 3750 Metro Switch Command Reference
OL-9645-10
Chapter 2 Catalyst 3750 Metro Switch Cisco IOS Commands
ip igmp max-groups
•
If you configure the throttling action as
replace
and set the maximum group limitation, the entries
that were previously in the forwarding table are removed. When the maximum number of entries is
in the forwarding table, the switch replaces a randomly selected multicast entry with the received
IGMP report.
•
When the maximum group limitation is set to the default (no maximum), entering the
ip igmp
max-groups
{
deny | replace
} command has no effect.
Examples
This example shows how to limit to 25 the number of IGMP groups that a port can join.
Switch(config)#
interface gigabitethernet1/0/2
Switch(config-if)#
ip igmp max-groups 25
This example shows how to configure the switch to replace the existing group with the new group for
which the IGMP report was received when the maximum number of entries is in the forwarding table:
Switch(config)#
interface gigabitethernet2/0/1
Switch(config-if)#
ip igmp max-groups action replace
You can verify your setting by using the
show running-config
privileged EXEC command and by
specifying an interface.
Related Commands
Command
Description
show running-config
interface
interface-id
Displays the running configuration on the switch interface, including the
maximum number of IGMP groups that an interface can join and the
throttling action. For syntax information, select
Cisco IOS Configuration
Fundamentals Command Reference
,
Release 12.2
>
File Management
Commands
>
Configuration File Management Commands
.
