BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK 84XX SERIES
20-BD5605-00
©
2018 BROADSOFT INC.
PAGE 20 OF 34
Step
Command
Description
System configuration file site.cfg
Step 6
(Optional) Enable device authentication
of SIP requests from BroadWorks.
Example:
voIpProt.SIP.requestValidation
.1.request=”INVITE”
voIpProt.SIP.requestValidation
.1.method=”digest”
voIpProt.SIP.requestValidation
.digest.realm=”as.iop1.broadwo
rks.net”
(Optional) configure the device to
challenge SIP requests from
BroadWorks.
The configuration parameters identify,
which SIP requests are challenged by
the phone using digest authentication.
The registered authentication credentials
(user/password) are used for the
challenge.
Step 7
(Optional) Configure SIP-Info style of
DTMF Signaling (RFC-2976)
Example:
tone.dtmf.chassis.masking=”1”
tone.dtmf.viaRTP=”0”
voIpProt.SIP.dtmfViaSignaling.
rfc2976=”1”
Spectralink 84xx phones support RFC
2833 by default and will revert to in band
DTMF signaling if the far end does not
advertise support for RFC 2833.
However, if SIP-Info style of DTMF
signaling (RFC2976) is desired, the
parameters at left can be used to disable
RFC 2833 DTMF signaling and enable
RFC 2976.
4.2.3 Configure Service Settings
Step
Command
Description
Step 1
Configure the phone to always restart on
checkSync.
Example:
voIpProt.SIP.specialEvent.chec
kSync.alwaysReboot=”1”
Enable the phone so that it always
restarts when the BroadWorks device
reset button is selected.
Step 2
(Optional) Configure Network-managed
Conferencing.
Example:
voIpProt.SIP.conference.addres
call.localConferenceEnabled="0
"
The two parameters referenced will
configure the phone to use Network
Based Conferencing.
Step 3
Configure the dialplan:
Example 1:
Dialplan.digitmap=”x.T”
Example 2:
dialplan.digitmap=”[2346789]11
|[0-
1]
[2-9]11|0[#T]|00|01
[2-9]xx.[#T]|*xx| #xx |
011x.[#T]|
[0-1]xxxxxxx[#T]|[0-1]
[2-9]xxxxxxxxx|
[2-9]xxxxxxxxx|
[2-
9]xxxxxx[#T]|101xxxx.[#T]|11|[
2-
9]x.[#T]”
The digit map used for the dial plan.
The dial plan is configured as a string
compatible with the MGCPstyle Digit
Maps described in RFC 3435.
