8-45
Cisco ASR 1000 Series Aggregation Services Routers Hardware Installation Guide
OL-13208-09
Chapter 8 Cisco ASR 1002 Router Overview and Installation
Connecting a Terminal to the Cisco ASR1000-RP1 Console Port
•
One RJ-45 to RJ-45 crossover cable
•
One RJ-45 to DB-9 (female) adapter
A crossover cable reverses pin connections from one end to the other. In other words, it connects pin 1
(at one end) to pin 8 (at the other end), pin 2 to pin 7, pin 3 to pin 6, and so on. You can identify a
crossover cable by comparing the two modular ends of the cable. Hold the cable ends in your hand,
side-by-side, with the tabs at the back. Ensure that the wire connected to the outside (left) pin of the left
plug (pin 1) is the same color as the wire connected to the outside (right) pin of the right plug (pin 8).
Use the following procedure to connect a video terminal to the console port on a route processor.
Note
Each Cisco ASR 1000 Series Route Processor 1 must have a console port connection (typically to a
terminal server) if you are running a redundant configuration in the chassis.
Step 1
Connect one end of the RJ-45 cables to the serial RJ-45 port (CON) on the Cisco embedded
ASR1000-RP1 (see
Figure 8-36
).
Figure 8-36
Cisco ASR 1002 Router Console Port Connection on Cisco Embedded ASR1000-RP1
Step 2
Run the cable up and through the cable-management bracket and connect the other end of the RJ-45
cable to the RJ-45 adapter (see
Figure 8-36
).
Step 3
Connect the adapter to your video terminal to complete the cable connection.
Step 4
Power on your video terminal.
Step 5
Configure your video terminal to match the following default console port settings:
•
9600 baud
•
8 data bits
•
No parity generation or checking
•
1 stop bit
•
No flow control
Step 6
Go to the
“Connecting Cables” section on page 8-46
to continue the installation.
1
CON port connection
2
AUX port connection
280285
ASR 1002
stat
pwr
min
maj
crit
0
1
C
/A
A
/L
0
1
C/
A
A/
L
STAT
QE0
QE1
QE2
QE3
BOOT
CARRIE
R
LINK
PWR ST
AT
MTS
MGMT
AUX
CON
SPA-4XOC
3-POS
S
T
AT
U
S
0
1
2
3
C
/A
A
/L
C
/A
A
/L
C/A
A
/L
C
/A
A
/L
1
2
