Cisco ASR 920 series, Руководство по настройке Ethernet-маршрутизатора

Страница: 288 / 438

DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. enable Step 1
Example:
Device> enable
• Enter your password if prompted.
Enters global configuration mode. configure terminal
Example:
Device# configure terminal
Step 2
Defines an outward CFM domain at a specified level and
enters Ethernet CFM configuration mode. ethernet cfm domain domain-name level level-id
Example:
Device(config)# ethernet cfm domain Customer
level 7
Step 3
Configures a maintenance association within a maintenance
domain and enters Ethernet connectivity fault management
(CFM) service configuration mode.
service short-ma-name evc evc-name vlan vlanid
direction down
Example:
Device(config-ecfm)# service s41 evc 41 vlan 41
direction down
Step 4
Statically defines the MEPs within a maintenance
association.
mep mpid mpid
Example:
Device(config-ecfm)# mep mpid 702
Step 5
Returns the device to global configuration mode. exit
Example:
Device(config-ecfm)# exit
Step 6
Configures the maximum amount of time that the device
waits for remote MEPs to come up before the cross-check
operation is started. ethernet cfm mep crosscheck start-delay delay
Example:
Device(config)# ethernet cfm mep crosscheck
start-delay 60
Step 7
Returns the device to privileged EXEC mode.
exit
Example:
Device(config)# exit
Step 8
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
270
Configuring Ethernet CFM
Configuring Ethernet CFM