Cisco ASR 920 series, Руководство по настройке Ethernet-маршрутизатора

Страница: 328 / 438

Configuring Link Monitoring Options
Perform this optional task to specify link monitoring options. Steps 4 through 10 can be performed in any
sequence.
SUMMARY STEPS
1. enable
2.
configure terminal
3. interface type number
4. ethernet oam [ max-rate oampdus | min-rate num-seconds | mode { active | passive } | timeout seconds ]
5.
ethernet oam link-monitor frame { threshold { high { none | high-frames } | low low-frames } | window
milliseconds }
6. ethernet oam link-monitor frame-period { threshold { high { none | high-frames } | low low-frames } |
window frames
}
7. ethernet oam link-monitor frame-seconds { threshold { high { none | high-frames } | low low-frames } |
window milliseconds }
8.
ethernet oam link-monitor receive-crc { threshold { high { high-frames | none } | low low-frames } |
window milliseconds }
9.
ethernet oam link-monitor transmit-crc
{
threshold
{
high
{ high-frames |
none
} |
low low-frames
} |
window milliseconds }
10. ethernet oam link-monitor symbol-period { threshold { high { none | high-symbols } | low low-symbols }
|
window symbols
}
11. exit
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. enable Step 1
Example:
Device> enable
• Enter your password if prompted.
Enters global configuration mode. configure terminal
Example:
Device# configure terminal
Step 2
Identifies the interface and enters interface
configuration mode. interface type number
Example:
Device(config)# interface gigabitEthernet 0/0/3
Step 3
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
310
Using Ethernet Operations Administration and Maintenance
Configuring Link Monitoring Options