Cisco ASR 920 series, Руководство по настройке Ethernet-маршрутизатора

Страница: 356 / 438

Purpose Command or Action
Example:
Device> enable
• Enter your password if prompted.
Enters global configuration mode. configure terminal
Example:
Device# configure terminal
Step 2
Specifies the rate at which LLDP packets are sent every
second. lldp timer rate
Example:
Device(config)# lldp timer 75
Step 3
Returns to privileged EXEC mode. end
Example:
Device(config)# end
Step 4
Monitoring and Maintaining LLDP in Multivendor Networks
Perform this task to monitor and maintain LLDP in multivendor networks. This task is optional, and Steps 2
and 3 can be performed in any sequence.
SUMMARY STEPS
1.
enable
2.
show lldp
[
entry
{
*
| word } |
errors
|
interface
[
ethernet number
]|
neighbors
[
ethernet number
|
detail
]|
traffic
]
3. clear lldp { counters | table }
4.
end
DETAILED STEPS
Purpose Command or Action
Enables privileged EXEC mode. enable Step 1
Example:
Device> enable
• Enter your password if prompted.
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
338
Using Link Layer Discovery Protocol in Multivendor Networks
Monitoring and Maintaining LLDP in Multivendor Networks