Cisco ASR 920 series, Руководство по настройке Ethernet-маршрутизатора

Страница: 160 / 438

Purpose Command or Action
Sets the maximum size for the CFM traceroute cache
table. ethernet cfm traceroute cache size entries
Example:
Device(config)# ethernet cfm traceroute cache
size 200
Step 12
Sets the amount of time that CFM traceroute cache entries
are retained. ethernet cfm traceroute cache hold-time minutes
Example:
Device(config)# ethernet cfm traceroute cache
hold-time 60
Step 13
Specifies an interface and enters interface configuration
mode. interface type number
Example:
Device(config)# interface gigabitethernet0/0/2
Step 14
Configures an Ethernet service instance on an interface
and enters Ethernet service configuration mode.
service instance id ethernet
[ evc-name ]
Example:
Device(config-if)# service instance 333 ethernet
evc1
Step 15
Sets the encapsulation method used by the interface. encapsulation encapsulation-type
Example:
Device(config-if-srv)# encapsulation dot1q 5
Step 16
Binds a service instance to a bridge domain instance. bridge-domain bridge-id
Example:
Device(config-if-srv)# bridge-domain 100
Step 17
Creates a MIP and sets the maintenance level number. cfm mip level { level }
Example:
Device(config-if-srv)#cfm mip level 4
Step 18
Returns to interface configuration mode. exit
Example:
Device(config-if-srv)# exit
Step 19
Carrier Ethernet Configuration Guide (Cisco ASR 920 Series)
142
Configuring Ethernet Connectivity Fault Management in a Service Provider Network
Configuring Ethernet CFM