Cisco AS5300 - Universal Access Server, Руководство по настройке программного обеспечения, Страница: 39 / 198

Basic Configuration 3-5
Configure
Configure
Verify
To verify you have assigned the correct IP address:
•
Enter the show arp command:
5300# show arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 172.16.254.254 _ 0800.207e.bead ARPA Ethernet0
5300#
Tips
If you are having trouble:
•
Make sure the cable connections are not loose or disconnected.
•
Make sure you are using the correct IP address.
Configuring Ethernet 100BaseT
Assign an IP address to the Ethernet 100BaseT interface of your access server so that it can be
recognized as a device on the Ethernet LAN. The Fast Ethernet interface supports 10- and 100-Mbps
speeds with the 100BaseT and 10BaseT routers, hubs, and switches.
Table 3-3 Configuring Ethernet 10BaseT
Step Command Purpose
1
5300> enable
Password: <password>
5300#
Enter enable mode (also called
privileged EXEC mode).
Enter the password.
You have entered enable mode when the
prompt changes to
5300#
.
2
5300# configure terminal
Enter configuration commands, one per line. End
with CNTL/Z.
5300(config)#
Enter global configuration mode. You
have entered the global configuration
mode when the prompt changes to
5300(config)#.
3
5300(config)# interface ethernet 0
5300(config-if)#
Enter Ethernet interface configuration
mode.
4
5300(config-if)# ip address 172.16.254.254
255.255.255.0
Assign an IP address and subnet mask to
the interface.
5
5300(config-if)# no shutdown Without issuing this command, you will
not have a connection to the network.
6
5300(config-if)# Ctrl-Z
5300#
%SYS-5-CONFIG_I: Configured from console by
console
Return to enable mode.
This message is normal and does not
indicate an error.