Cisco AS5300 - Universal Access Server, Руководство по настройке программного обеспечения, Страница: 28 / 198

Where to Go Next
Cisco AS5300 Universal Access Server Software Configuration Guide 1-12
Step 30 The
5300>
prompt indicates that you are now at the command-line interface (CLI) and
you have just completed the basic access server configuration. However, this is not a
complete configuration. At this point you have two options:
•
Run the setup script in the System Configuration dialog again and create another
configuration. Enter the following commands to repeat the setup script:
5300> enable
Password: <password>
5300# setup
•
Modify the existing configuration or configure additional features with the CLI as
described in the Dial Solutions Configuration Guide, the Dial Solutions Command
Reference Guide the Cisco IOS software configuration guide, and command reference
publications.
Where to Go Next
At this point you can proceed to:
•
The next chapter “Using Cisco IOS Software” to learn how to use the CLI to configure additional
features.
•
The chapter “Access Service Security” to configure security on the access server.
•
The chapter “Basic Configuration” for step-by-step instructions to configure the access server
manually. You can also refer to the Cisco IOS software configuration guide and command
reference publications for more advanced configuration topics. These publications are available
on the Documentation CD-ROM that arrived with your access server, on the World Wide Web
from Cisco’s home page, or you can order printed copies. If using Cisco’s home page, refer to
the topic Configuring Selected (feature) Cisco IOS Features, available online at
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/5300/sw_conf/index.htm