Cisco Aironet 340 Series, Руководство по установке оборудования

Страница: 77 / 132

4-5
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Chapter 4 Troubleshooting and Routine Procedures
Problems after Installing the Driver
During installation the adapter’s driver installation script scans for an unused I/O
range. The installation can fail if the I/O range found by the driver installation
script is occupied by another device but not reported by Windows. An I/O range
might not be reported if a device is physically present in the system but not
enabled under Windows. Follow the steps for your specific operating system to
obtain an available I/O range.
Resolving Resource Conflicts in Windows 95, 98, and Me
Step 1
Double-click My Computer, Control Panel, System, the Device Manager tab,
and Network Adapters.
Step 2 Select the Cisco Systems wireless LAN adapter.
Step 3 Click the Properties button.
Step 4 In the General screen, the Device Status field indicates if a resource problem
exists. If a problem is indicated, click the Resources tab.
Step 5
Deselect the Use automatic settings checkbox.
Step 6
Under Resource Settings or Resource Type, click Input/Output Range.
Step 7 Look in the Conflicting Device list at the bottom of the screen. If it indicates that
the range is being used by another device, click the Change Setting button.
Step 8
Scroll through the ranges in the Value dialog box and select one that does not
conflict with another device. The Conflict Information window at the bottom of
the screen indicates if the range is already being used.
Step 9 Click OK.
Step 10 Under Resource Settings or Resource Type, click Interrupt Request.
Step 11 Look in the Conflicting Device list at the bottom of the screen. If it indicates that
the IRQ is being used by another device, click the Change Setting button.
Step 12
Scroll through the IRQs in the Value dialog box and select one that does not
conflict with another device. The Conflict Information window at the bottom of
the screen indicates if the IRQ is already being used.
Step 13
Click OK.
Step 14
Reboot your computer.