Cisco Aironet 340 Series, Руководство по установке оборудования, Страница: 48 / 132

Chapter 3 Installing the Client Adapter
Installing the Correct Driver
3-10
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Step 7
The Update Device Driver Wizard dialog box opens and indicates that Windows
will complete the installation of the client adapter. Click Next.
Step 8 If the Update Device Driver Wizard indicates that Windows was unable to locate
a driver for the client adapter, click Other Locations.
Step 9
In the Select Other Location window, enter the path to the location where you
extracted the Windows 95 driver files. The default is A:\, so if you extracted the
files to the root directory on a floppy disk, you do not have to enter a path. If,
however, you extracted the files to a directory on your hard drive, you must enter
the entire path (for example, C:\Win95).
Step 10
Click OK.
Step 11
When the Update Device Driver Wizard indicates that it has found the driver,
click Finish.
Step 12 When the Insert Disk window appears prompting you to insert the Aironet
Wireless LAN Adapter Installation Disk, click OK.
Step 13
If a windows appears indicating that the pcx500.sys file could not be found, enter
the same path that you entered in Step 9 and click OK.
Step 14
If you are prompted to insert the Windows 95 operating system disk, click OK
and do one of the following:
•
If the Windows 95 operating system files are installed on your computer, they
are usually located in the C:\Windows\Options\Cabs folder. Type
C:\Windows\Options\Cabs in the Copy files from dialog box. Click OK to
copy the required files.
• If Windows 95 prompts for the Windows 95 operating system CD, insert this
CD into your CD-ROM drive. If your CD-ROM drive is drive D, the path in
the dialog box should be D:\Win95. Click OK to copy the required files.
Step 15
When prompted to restart your computer, remove any disks and click Yes.
Step 16
When the computer restarts, double-click My Computer, Control Panel, and
Network.
Step 17 Select the Cisco Systems wireless LAN adapter and click Properties.
Step 18 In the client adapter Properties window, click the Advanced tab.
Step 19
Select Client Name. Type your computer’s unique client name in the Value
dialog box.
Step 20 Select SSID. Type your RF network’s (case-sensitive) SSID in the Value dialog
box. Click OK.