Cisco Aironet 340 Series, Руководство по установке оборудования, Страница: 52 / 132

Chapter 3 Installing the Client Adapter
Installing the Correct Driver
3-14
Cisco Aironet Wireless LAN Adapters Hardware Installation Guide
OL-0795-01
Step 10
In the Adapter Setup window, select Client Name. Type your computer’s unique
client name in the Value dialog box.
Step 11 Select SSID. Type your RF network’s (case-sensitive) SSID in the Value dialog
box.
Step 12
Enter an available IRQ number, which you obtained in Step 2.
Step 13
Click OK and Close.
Step 14 The Microsoft TCP/IP Properties window should open. If it does not open,
double-click My Computer, Control Panel, and Network. Select Protocols,
TCP/IP, and Properties.
Step 15
Perform one of the following:
•
If you are connected to a DHCP server, select Obtain an IP address from a
DHCP server. When asked if you want to enable DHCP, click Yes and OK.
•
If you are not connected to a DHCP server, select Specify an IP address and
enter the IP address, subnet mask, and default gateway address of your
computer (which can be obtained from your system administrator). Click
OK.
Step 16 When prompted to restart your computer, remove the CD and click Yes.
The driver installation is complete.
Installing the Driver for Windows 2000
If your computer’s operating system is Windows 2000, follow these steps.
Step 1
After you insert the client adapter into your computing device, Windows 2000
automatically detects it and briefly opens the Found New Hardware window.
The Found New Hardware Wizard window opens and indicates that the wizard
will help you to install the driver.
Step 2
Click Next. Another window opens and asks what you want the wizard to do.
Step 3
Select Search for a suitable driver for my device (recommended) and click
Next.