17-2
Cisco Aironet 1400 Series Wireless Bridges Software Configuration Guide
OL-4059-01
Chapter 17 Managing Firmware and Configurations
Working with the Flash File System
Working with the Flash File System
The Flash file system on your bridge provides several commands to help you manage software image
and configuration files.
The Flash file system is a single Flash device on which you can store files. This Flash device is called
flash:
.
This section contains this information:
•
Displaying Available File Systems, page 17-2
•
Setting the Default File System, page 17-3
•
Displaying Information About Files on a File System, page 17-3
•
Changing Directories and Displaying the Working Directory, page 17-4
•
Creating and Removing Directories, page 17-4
•
Copying Files, page 17-5
•
Deleting Files, page 17-5
•
Creating, Displaying, and Extracting tar Files, page 17-6
•
Displaying the Contents of a File, page 17-8
Displaying Available File Systems
To display the available file systems on your bridge, use the
show file systems
privileged EXEC
command as shown in this example:
BR#
show file systems
File Systems:
Size(b) Free(b) Type Flags Prefixes
* 16128000 11118592 flash rw flash:
16128000 11118592 unknown rw zflash:
32768 26363 nvram rw nvram:
- - network rw tftp:
- - opaque rw null:
- - opaque rw system:
- - opaque ro xmodem:
- - opaque ro ymodem:
- - network rw rcp:
- - network rw ftp:
Table 17-1
lists field descriptions for the
show file systems
command.
Table 17-1
show file systems Field Descriptions
Field
Value
Size(b)
Amount of memory in the file system in bytes.
Free(b)
Amount of free memory in the file system in bytes.
