vii
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-2155-02
Preface
This section describes the objectives, audience, organization, and conventions of the Cisco Aironet 1200
Series Access Point Hardware Installation Guide.
Objectives
This publication explains the steps for initial setup and basic configuration of the single or dual-band
access point supporting 2.4-GHz and 5-GHz operation. This publication also provides troubleshooting
information and detailed specifications.
Audience
This publication is for the person installing and configuring a Cisco Aironet 1200 Series Access Point
for the first time. The installer should be familiar with network structures, terms, and concepts.
Organization
This guide contains the following sections:
Chapter 1, “Overview,”
describes the features and specifications of access points.
Chapter 2, “Installation,”
provides basic installation instructions.
Chapter 3, “Basic Configuration,”
describes how to enter basic configuration settings.
Chapter 4, “Mounting Instructions,”
provides mounting instructions for the access point.
Chapter 5, “2.4-GHz Radio Upgrade,”
provides instructions for installing, upgrading, and removing the
2.4-GHz mini-PCI radio card.
Chapter 6, “5-GHz Radio Module Upgrade,”
provides instructions for installing and removing the
5-GHz radio module.
Chapter 7, “Troubleshooting,”
provides solutions to potential problems encountered during setup.
Appendix A, “Translated Safety Warnings,”
lists translations of the safety warnings in this publication.
Appendix B, “Declarations of Conformity and Regulatory Information,”
describes the regulatory
conventions to which the access point conforms and provides guidelines for operating access points in
Japan.
