Cisco 8811 Скачать руководство пользователя

Страница: 74 / 146

Add a Third Party to a Conference

Procedure

Step 1

Start with a connected call that is not on hold.

Step 2

Press

Conference

and do one of the following:

•

Enter the phone number for the party you want to add and press

Call

•

Press a speed-dial button.

•

Press

Speed Dial

, enter a speed-dial number, and press

Speed Dial

again.

•

Press

Active Calls

and select a call.

•

Select a call from the Call History.

Step 3

Wait for the party to answer or skip to step 4 while the call is ringing.

Step 4

Press

Conference

The conference begins.

Join Calls Into a Conference

The conference is established on the line that had the active call.

Your system administrator controls the ability to transfer calls from one line to another line.

Procedure

Step 1

Start with two connected calls.

Step 2

Make sure that one of the calls is active (not on hold). If both calls are on hold, resume one call.

Step 3

Press

Conference

Step 4

Press the line button for the other (held) call or if the held call is on another line:

a) Press

Active Calls

b) Choose a call from the list.
c) Press

Conference

The conference begins. The conference is established on the line that had the active call.

Swap Between Calls Before Completing a Conference

You can consult privately with the conference and another person, before adding the person into the conference.

Cisco IP Phone 8811, 8841, 8851, 8851NR, and 8861 User Guide for Cisco Unified Communications Manager

10.5

Advanced Calling Features

Add a Third Party to a Conference

Содержание 8811



















































































































































Результаты поиска

Содержание 8811

Отзывы:

Похожие инструкции для 8811

Бренды по названию

Популярные бренды

Cisco 8811, Руководство пользователя

Результаты поиска

Содержание 8811

Отзывы:

Похожие инструкции для 8811

Бренды по названию

Популярные бренды