manualshive.com logo in svg

Cisco 7931G - Unified IP Phone VoIP, Руководство администратора

Поделиться
Скачать
Cisco 7931G - Unified IP Phone VoIP Скачать руководство пользователя страница 132

 

Chapter 5      Configuring Features, Templates, Services, and Users

Telephony Features Available for the Phone

5-6

Cisco Unified IP Phone 7931G Administration Guide for Cisco Unified Communications Manager 6.0

OL-12457-01

Call forward 
destination 
override

Allows you to override Call Forward All 
(CFA) in cases where the CFA target places 
a call to the CFA initiator. This allows the 
CFA target to reach the CFA initiator for 
important calls. The override works whether 
the CFA target phone number is internal or 
external.

For more information, refer to 

Cisco 

Unified Communications Manager 
New and Changed Information 
Guide, Release 5.1(1), “Cisco 
Unified Communications Manager 
System Guide” section, 

“Cisco 

Unified IP Phones” chapter.

Call park

Allows users to park (temporarily store) a 
call and then retrieve the call by using 
another phone in the Cisco Unified 
Communications Manager system.

For more information, refer to:

•

Cisco Unified Communications 
Manager Administration Guide, 
“

Call Park

”

 chapter.

•

Cisco Unified Communications 
Manager System Guide, “

Cisco 

Unified IP Phones” chapter.

•

Cisco Unified Communications 
Manager Features and Services 
Guide

, “Call Park” chapter.

Call pickup

Allows users to redirect a call that is ringing 
on another phone within their pickup group 
to their phone.

You can configure an audio and/or visual 
alert for the primary line on the phone. This 
alert notifies the users that a call is ringing in 
their pickup group.

For more information, refer to 

Cisco 

Unified Communications Manager 
Administration Guide, “Call 

Pickup 

Group Configuration” chapter.

Call Recording

Allows a supervisor to record an active call. 
The user might hear an intermittent tone 
(beep tone) during a call when it is being 
recorded.

Note

The intercom feature is disabled 
when a call is being monitored or 
recorded.

For more information, refer to 

Cisco 

Unified Communications Manager 
Features and Services Guide, 
“

Monitoring and Recording” chapter.

Table 5-1

Telephony Features for the Cisco Unified IP Phone (continued)

Feature

Description Configuration 

Reference

Содержание 7931G - Unified IP Phone VoIP





































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды