Cisco 6901 Standard Скачать руководство пользователя страница 90

Страница: 90 / 156

6-10

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24582-01

Chapter 6 Monitoring the Cisco Unified IP Phone Remotely

Device Logs

DHCP timeout

DHCP server did not respond.

•

Network is busy—The errors should resolve
themselves when the network load reduces.

•

No network connectivity between the DHCP
server and the phone—Verify the network con-
nections.

•

DHCP server is down—Check the DHCP server
configuration.

•

Errors persist—Consider assigning a static IP
address.

DNS timeout

DNS server did not respond.

•

Network is busy—The errors should resolve
themselves when the network load reduces.

•

No network connectivity between the DNS server
and the phone—Verify the network connections.

•

DNS server is down—Check the DNS server
configuration.

DNS unknown host

DNS could not resolve the name of the
TFTP server or Cisco Unified Communi-
cations Manager.

•

Verify that the host names of the TFTP server or
Cisco Unified Communications Manager are
configured properly in DNS.

•

Consider using IP addresses rather than host
names.

Duplicate IP

Another device is using the IP address
assigned to the phone.

•

If the phone has a static IP address, verify that
you have not assigned a duplicate IP address.

•

If you are using DHCP, check the DHCP server
configuration.

Error update locale

One or more localization files could not
be found in the TFTPPath directory or
were not valid. The locale was not
changed.

From Cisco Unified Operating System Administra-
tion, check that the following files are located within
subdirectories in the TFTP File Management:

•

Located in subdirectory with the same name as
network locale:

–

tones.xml

•

Located in subdirectory with the same name as
user locale:

–

glyphs.xml

–

dictionary.xml

–

kate.xml

File not found

The phone cannot locate the phone load
file that is specified in the phone config-
uration file on the TFTP server.

From Cisco Unified Operating System Administra-
tion, make sure that the phone load file is on the TFTP
server, and that the entry in the configuration file is
correct.

IP address released

The phone has been configured to release
its IP address.

The phone remains idle until it is power cycled or you
reset the DHCP address.

Table 6-5

Status Messages on the Cisco Unified IP Phone 6900 Series Phones (continued)

Message

Description

Possible Explanation and Action

Содержание 6901 Standard





























































































































































Результаты поиска

Содержание 6901 Standard

Отзывы:

Похожие инструкции для 6901 Standard

Бренды по названию

Популярные бренды

Cisco 6901 Standard, Руководство администратора

Результаты поиска

Содержание 6901 Standard

Отзывы:

Похожие инструкции для 6901 Standard

Бренды по названию

Популярные бренды