background image

 

2-5

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

OL-24582-01

Chapter 2      Preparing to Install the Cisco Unified IP Phone on Your Network

    Understanding Phone Configuration Files

Obtaining Additional Information About Power

For related information about power, refer to the documents shown in 

Table 2-2

. These documents 

provide information about the following topics:

Cisco switches that work with the Cisco Unified IP Phone 6901 and 6911

The Cisco IOS releases that support bidirectional power negotiation

Other requirements and restrictions regarding power

Understanding Phone Configuration Files

The TFTP server stores the phone configuration files that define parameters for connecting to Cisco 
Unified Communications Manager. In general, any time you make a change in Cisco Unified 
Communications Manager that requires the phone to be reset, a change is automatically made to the 
phone’s configuration file.

Configuration files also contain information about which image load the phone should be running. If this 
image load differs from the one currently loaded on a phone, the phone contacts the TFTP server to 
request the required load files. 

In addition, if the device security mode in the configuration file is set to Authenticated and the CTL file 
on the phone has a valid certificate for Cisco Unified Communications Manager, the phone establishes 
a TLS connection to Cisco Unified Communications Manager. Otherwise, the phone establishes a TCP 
connection.

Note

If the device security mode in the configuration file is set to Authenticated or Encrypted, but the phone 
has not received a CTL file, the phone tries four times to obtain a CTL file so it can register securely.

If you configure security-related settings in Cisco Unified Communications Manager, the phone 
configuration file contains sensitive information. To ensure the privacy of a configuration file, you must 
configure it for encryption. For detailed information, refer to the “

Configuring Encrypted Phone 

Configuration Files

” chapter in 

Cisco Unified Communications Manager Security Guide

. A phone 

requests a configuration file whenever it resets and registers with Cisco Unified Communications 
Manager.

A phone accesses a default configuration file named XmlDefault.cnf.xml from the TFTP server when 
the following conditions exist:

Table 2-2

Related Documentation for Power

Document Topics

URL

Cisco Unified IP Phone Power 
Injector

http://www.cisco.com/en/US/products/ps6951/index.html

PoE Solutions

http://www.cisco.com/en/US/netsol/ns340/ns394/ns147/ns412/net
working_solutions_package.html

Cisco Catalyst Switches

http://cisco.com/en/US/products/hw/switches/index.html

Integrated Service Routers

http://www.cisco.com/en/US/products/hw/routers/index.html

Cisco IOS Software

http://www.cisco.com/en/US/products/sw/iosswrel/products_ios_
cisco_ios_software_category_home.html

Содержание 6901 Standard





























































































































































Отзывы: