Cisco 4503-E - Catalyst Data Bundle Switch, Руководство по установке

Страница: 43 / 172

1-25
Catalyst 4500 E-Series Switches Installation Guide
OL-13972-02
Chapter 1 Product Overview
Catalyst 4510R+E Switch
Table 1-11 Catalyst 4510R+E Switch Features
Feature Description
Chassis Ten horizontal slots. Slots are numbered from 1 (top) to 10 (bottom).
Supervisor engines
•
Supports the following supervisor engines:
–
Supervisor Engine 7-E
– Supervisor Engine 6L-E
–
Supervisor Engine 6-E
– Supervisor Engine V-10GE
–
Supervisor Engine V
Note Refer to your software release notes for the minimum software
release versions required to support the supervisor engines.
• Supervisor engines must be installed in slot 3 or in slot 4.
•
Supervisor engine redundancy is supported in this chassis.
Note The Catalyst 4510R+E switch supports 1+1 supervisor engine
redundancy for integrated resiliency. With the support of stateful
switchover (SSO), the secondary supervisor engine serves as a
backup to immediately take over after a primary supervisor failure.
During the switchover, Layer 2 links are maintained transparently
without the need to renegotiate sessions.
Modules
•
Supports up to nine Catalyst 4500 series modules.
• Some Catalyst 4500 series modules may:
–
Not be supported
–
Require that you install a specific supervisor engine
–
Have chassis slot restrictions
– Require a specific software release level to operate
•
Check your software release notes for specific information.
Backplane 48 Gbps full duplex per slot
Port density
•
10/100 (RJ-45)—384 ports
•
10/100 with PoE (RJ-45)—384 ports
• 10/100 with or without PoE (RJ-21)—384 ports
•
100FX (MT-RJ)—384 ports
• 100LX-10 (MT-RJ) or 100BX-D (LC)—384 ports
•
1000BASE-X—388 ports
•
10/100/1000BASE-T—384 ports
•
10/100/1000BASE-T with PoE—384 ports
• 10GBASE-X—34 ports
Inline power Integrated support, 820 W per switching module