C H A P T E R
2-1
Cisco Connected Grid Routers 2010 Hardware Installation Guide
OL-21559-01
2
Preparing for Router Installation
This document provides preinstallation information, such as recommendations and requirements that
should be met prior to installing your router. See the following sections to prepare for installation.
•
Safety Recommendations, page 2-2
•
General Site Requirements, page 2-4
•
•
Router Environmental Requirements, page 2-4
•
Power Guidelines and Requirements, page 2-5
•
Required Tools and Equipment for Installation and Maintenance, page 2-9
•
Installation Checklist, page 2-10
•
Creating a Site Log, page 2-10
Note
To see translated warnings that appear in this publication, see the
Cisco Connected Grid Routers Series
Regulatory Compliance and Safety Information
document.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Warning
This equipment must be installed and maintained by service personnel as defined by AS/NZS 3260.
Incorrectly connecting this equipment to a general-purpose outlet could be hazardous. The
telecommunications lines must be disconnected 1) before unplugging the main power connector or 2)
while the housing is open, or both.
Statement 1043
Warning
This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit.
Statement 1028
