Cisco 12008, Руководство по установке и настройке, Страница: 376 / 382

Cisco 12008 Gigabit Switch Router Installation and Configuration Guide Index 2
to Ethernet port 3-24 to 3-27, 3-30 to 3-34
distance limitations 2-20
safety guidelines 2-5
ungrounded and uninsulated 2-5
card handling safety 2-5
caution
description xvi
caution, description xvi
cd command 4-51
CD-ROM, ordering documentation 4-64
chassis, lifting safely 2-3
checking
configuration, system 4-27
connections 4-3
codes, electrical 2-3
commands
b 4-8, 4-39
boot 4-36
boot system 4-34, 4-40
boot system flash 4-36, 4-53, 4-58
Break (interrupt) 4-41
cd 4-51
config terminal 4-26
config-register 4-38, 4-40, 4-46, 4-50, 4-53
configure terminal 4-38, 4-40, 4-46
confreg 4-44
copy 4-55, 4-58
copy running-config startup-config 4-30
delete 4-51
diag 6-2, 6-5, 6-6, 6-9
diag halt 6-3
dir 4-51
enable 4-26, 4-38, 4-45
EXEC command interpreter 4-11
format 4-49, 4-63
i (initialize) 4-45
interface 4-27
pwd 4-51
reload 4-39
setup 4-11
show running-config 4-27, 4-28, 4-29
show startup-config 4-31, 4-43
show version 4-25, 4-44
squeeze 4-52, 4-53
config terminal command 4-26
config-register command 4-38, 4-40, 4-46, 4-50, 4-53
configuration
file, saving 4-30
interfaces 4-20 to 4-24
register
bit meanings 4-39 to 4-43
boot filename 4-41
broadcast address settings 4-42
changing settings 4-38 to 4-39
configuration 4-33 to 4-42
settings at startup 4-36
transmission rate settings 4-42
samples 4-20 to 4-24
configure terminal command 4-38, 4-40, 4-46
configuring
global parameters 4-14
interfaces 4-20 to 4-24
system 4-12 to 4-27
using configuration mode 4-26 to 4-27
confreg command 4-44
connecting
AC-input power 3-43
alarm card connectors 3-34
auxiliary port 3-20, 3-27
console port 3-20
Ethernet port 3-24, 3-30
system ground 3-39
Connectionless Network Service
See CLNS, configuring
connections, checking 4-3
connector
auxiliary port 3-23, 3-29
console port 3-22, 3-29
Ethernet 3-24, 3-32
console port
connecting devices to 3-20, 3-27
description 1-33, 1-42