Cisco 12008, Руководство по установке и настройке, Страница: 203 / 382

Observing System Startup and Performing a Basic Configuration 4-19
Configuring the Cisco 12008
Note
SNMP is the most widely supported standard for managing networks.
SNMP provides a means to access and set configuration and run-time
parameters and to monitor and control network elements for routers and
communication servers. For more information about SNMP, refer to the
appropriate software configuration publications listed in the section entitled “If
You Need More Configuration Information.”
Step 10
Enter yes or no to the following query to accept or refuse Connectionless
Network Service (CLNS) management:
Configure CLNS? [no]: yes
CLNS router tag [area_1]:
CLNS domain [49]:
CLNS area [0001]:
CLNS station id [0027.25E9.B640]:
Note
CLNS is an Open System Interconnection (OSI) layer service that does
not require a circuit to be established before transmitting data. For more
complete information about CLNS, refer to the appropriate software
configuration publications listed in the section entitled “If You Need More
Configuration Information.”
On completion of this procedure, you have successfully established the router’s global
configuration parameters.
Sample Display of Global Parameters
The following sample display lists the global parameters that you entered in Step 3 through
Step 10 in the preceding section.