Cisco 11500 Series Скачать руководство пользователя страница 61

Страница: 61 / 392

1-27

Cisco Content Services Switch Administration Guide

OL-5647-02

Chapter 1 Managing the CSS Software

Restoring Files from the Archive Directory

Archiving Scripts

Use the

archive script

command to archive a script file or user-profile file. The

syntax for this command is:

archive script

script_filename

{

archive_filename

}

The variables are as follows:

•

script_filename

- The filename of the script to archive. To see a list of scripts,

enter

archive script ?

•

archive_filename

- (Optional) The name you want to assign to the archive file.

Enter an unquoted text string with a maximum of 32 characters.

Clearing the Archive Directory

Use the

clear archive

command to clear a file in the archive directory. Enter the

archive filename as the name of the archive file to clear. To list the archive files,
enter

clear archive ?

. The syntax for this command is:

clear archive

archive_filename

Restoring Files from the Archive Directory

The archive directory resides on the CSS disk (hard or Flash disk) to store logs,
scripts, and startup-config files. Use the

restore

command to restore files

previously archived in the CSS archive directory.

The syntax for this command is:

restore

archive_filename

[

log

{

log_filename

} |

script

{

script_filename

startup-config

]

Содержание 11500 Series









































































































































































































































































































































































































Результаты поиска

Содержание 11500 Series

Отзывы:

Похожие инструкции для 11500 Series

Бренды по названию

Популярные бренды

Cisco 11500 Series, Руководство администратора

Результаты поиска

Содержание 11500 Series

Отзывы:

Похожие инструкции для 11500 Series

Бренды по названию

Популярные бренды