Cisco 11500 Series, Руководство администратора

Страница: 143 / 392

4-23
Cisco Content Services Switch Administration Guide
OL-5647-02
Chapter 4 Using the CSS Logging Features
Copying Log Files to an FTP or TFTP Server
Copying Log Files to an FTP or TFTP Server
To copy log files from the CSS to a File Transfer Protocol (FTP) or Trivial File
Transfer Protocol (TFTP) server, use the
copy log command. The copy log
command is available only in SuperUser mode.
This section includes the following topics:
• Copying Log Files to an FTP Server
•
Copying Log Files to a TFTP Server
Copying Log Files to an FTP Server
To copy a log file to an FTP server, use the copy log ftp command. Before you
copy a log file from the CSS to an FTP server, create an FTP record file containing
the FTP server IP address, username, and password. Refer to
Chapter 1,
Managing the CSS Software , for information on configuring an FTP record.
notice Log notice messages, including errors at the warning
level
warning Log warning errors (default), including errors at the
error level
error Log errors, including errors at the critical level
critical Log critical errors, including errors at the alert level
alert Log alert errors, including errors at the fatal level
fatal Log fatal errors only (Quiet)
File:
Filename: Name of the log file
Current size: Current size of the log file
Log to Disk Identifies whether logging to disk (Flash disk or hard
disk) is Enabled or Disabled.
Table 4-5 Field Descriptions for the show log-state Command (continued)
Field Description