Chapter 5 Configuring Simple Network Management Protocol (SNMP)
Defining the CSS as an SNMP Agent
5-16
Cisco Content Services Switch Administration Guide
OL-5647-02
Configuring an SNMP Name
To set or modify the SNMP name for this system, use the
snmp name
command.
You can specify only one name. The syntax for this global configuration mode
command is:
snmp name
“name”
Enter the SNMP name as the unique name assigned to a system by the
administrator. Enter a quoted text string with a maximum of 255 characters. The
standard name convention is the system’s fully qualified domain name (for
example, [email protected]).
For example:
(config)#
snmp name “[email protected]”
To remove the SNMP name for a system and reset it to the default of “Support”,
enter:
(config)#
no snmp name
Configuring an SNMP Trap Host
To set or modify the SNMP host to receive traps from a CSS, use the
snmp
trap-host
command. You can specify a maximum of five hosts. The syntax for
this global configuration mode command is:
snmp trap-host
ip_or_host community_name
{
snmpv2
}
The variables and option for this command are:
•
ip_or_host
- The IP address or host name of an SNMP host that has been
configured to receive traps. Enter an IP address in dotted-decimal notation
(for example, 192.168.11.1) or in mnemonic host-name format (for example,
myhost.mydomain.com).
•
community_name
- The community name to use when sending traps to the
specified SNMP host. Enter an unquoted text string with no spaces and a
maximum of 12 characters.
•
snmpv2
- Specifies that traps be sent in SNMPv2 format.
Содержание 11500 Series
Страница 16: ...Contents xvi Cisco Content Services Switch Administration Guide OL 5647 02 ...
Страница 18: ...Figures xx Cisco Content Services Switch Administration Guide OL 5647 02 ...
Страница 120: ...Chapter 3 Configuring User Profiles Where to Go Next 3 16 Cisco Content Services Switch Administration Guide OL 5647 02 ...
