Cisco 11500 Series Скачать руководство пользователя страница 118

Страница: 118 / 392

Chapter 3 Configuring User Profiles

Copying and Saving User Profiles

3-14

Cisco Content Services Switch Administration Guide

OL-5647-02

Copying the Running Profile to the Default-Profile

To copy the running profile to the default profile, use the

copy profile

default-profile

command. This command is available only in SuperUser mode.

For example:

copy profile default-profile

Copying the Running Profile to a User Profile

To copy the changes made to the running profile to the user profile, use the

copy

profile user-profile

command. This command is available only in SuperUser

mode. This command creates a file

username

-profile if one does not exist (where

username

is the current username).

For example:

copy profile user-profile

Copying the Running Profile to an FTP Server

To copy the running profile to an FTP server, use the

copy profile ftp

command.

This command is available only in SuperUser mode. The syntax is:

copy profile ftp

ftp_record

filename

The variables for this command are as follows:

•

ftp_record

- The name of the FTP record file that contains the server

IP address, username, and password. Enter an unquoted text string with no
spaces and a maximum of 32 characters.

•

filename

- The name you want to assign to the file on the server. Include the

full path to the file. Enter an unquoted text string with no spaces.

For example:

copy profile ftp arrowrecord \records\arrowftprecord

Содержание 11500 Series









































































































































































































































































































































































































Результаты поиска

Содержание 11500 Series

Отзывы:

Похожие инструкции для 11500 Series

Бренды по названию

Популярные бренды

Cisco 11500 Series, Руководство администратора

Результаты поиска

Содержание 11500 Series

Отзывы:

Похожие инструкции для 11500 Series

Бренды по названию

Популярные бренды