Appendix C Command Summary
Configuration Command Set
C-94
Cisco 11000 Series Secure Content Accelerator Configuration Guide
78-13124-06
Note
When a hostname is used rather than an IP address, the hostname is
resolved as an IP address when written to the configuration.
Related Commands
show date (Non-Privileged Command Set)
show rdate-server (Non-Privileged Command Set)
registration-code
Stores the registration code of the device.
registration-code <code>
Syntax Description
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
rip
Enables Routing Interface Protocol (RIP) for the current device.
rip [v1|v2]
no rip [v1|v2]
Syntax Description
Usage Guidelines
Availability: Serial, Telnet; FIPS Mode (serial only)
code
The registration code of the device; this code must be
entered within quotation marks (““).
v1
Specifies RIP v1.
v2
Specifies RIP v2.