VCC-HD3N
Rev. 905-0160-01
©2018 CIS Corporation. All rights reserved.
24
Set Spot Block
None
Push the CENTER button to confirm Spot Block, X,
Y, W, and H.
Flicker Cancel
ON/OFF
To set flicker cancel.
※Note 4
※Note 1: I f you prefer setting
further details, please set them via serial commands.
※Note 2: The values set via serial com m ands will be reflected to key operation.
※Note 3:
There may be gap (small differences) between the set shutter value and the actual shutter value.
For the actual shutter value, please refer to Section 10.4.3. Actual Shutter Value limited by output
format.
※Note 4: Flicker cancel function is invalid at 50fps, 25fps, 24fps, and 23. 97fps regardless of its settings.
※Note 5:
When a high luminance object is shot with DC iris function, hunting could occur under some conditions.
In such cases, adjust DC Iris Response Speed or Exposure Compensation Value to try to reduce it.
Top Menu
Setting Menu
Selected Items
Explanation
White Balance
WB Mode
Auto
Select and set WB Mode with
◀
/
▶
button.
Outdoor
Daylight
(Sun light)
Cloudy
Shade
Tungsten
Flw
(Fluorescent White)
Fln (Fluorescent noon white)
Fld (Fluorescent day light)
Auto(ATW)
One push
Manual
Preset1
Preset2
Preset3
Preset4
Preset5
WB Red Gain 0~800
To set Red Gain/Blue Gain
when WB Mode is at Manual.
WB Blue Gain 0~800
One Push
Start
None
Valid only when WB mode is at
One Push.
Execute One Push WB with the
CENTER button.
Set Preset
Number
1~5
Select the preset number with
the
◀
/
▶
button, and push
the CENTER button to save the
current WB value.
