VCC-HD3N
Rev. 905-0160-01
©2018 CIS Corporation. All rights reserved.
6
(17)
Auto Exposure Detection
Average/Center-Weighted/Spot/Backlight Compensation
(18)
Flicker Cancellation
ON, OFF (typ.)
*Valid at 60fps, 59.94fps, 30fps, and 29.97fps.
(19)
Edge Enhancement
OFF, 1~7 (typ.2)
(20)
Color Correction
Standard, Fluorescent Light, Tungsten Lamp
(21)
Color Saturation Adjustment
0% (B/W)~100% (typ.) ~200%
(22)
Color Compression
OFF, 1~7 (typ.5)
(23)
Noise Reduction
ON, OFF
(24)
Gamma (Contrast)
BT.709 -2, BT.709 -1, BT.709, BT.709 +1, BT.709 +2
(25)
Master Pedestal
-100 ~ 0 ~ +100
(26)
Pedestal (R, G, B)
RGB: -100 ~ 0(typ.) ~ +100 each
(27)
Color Balance
RGB: 50 ~ 100(typ.) ~ 150 each
(28)
Pixel Defect (White spot)
Correction
Corrected at factory setting.
(29)
LTC
OFF, ON The external SMPTE Time code can be input to LTC IN terminal.
(Internal self-running time code is resettable).
(30)
Preset (Camera Settings)
1, 2, 3, and 4 (Four kinds of preset can be set.)
(31)
DC IRIS Output
Auto/Open selectable. Can be used with electric shutter. (Electric shutter has priority.)
(32)
Remote Control Operation
The camera can be controlled via RS-232C communications with φ3.5 plug (4poles).
Camera settings can be controlled by control software via PC. With connecting the optional
remote controller, camera settings can be set on OSD (On Screen Display).
(33)
Safety/Quality Standards
UL: Conform to UL Standard including materials and others.
CE
EMC
2014/30/EU
Emission
：
EN61000-6-3:2007+A1:2011
Immunity
：
EN61000-6-2:2005
RoHS: 2011/65/EU
EN50581(RoHS2)
FCC Class A Digital Device
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
(34)
Durability
Vibration
Acceleration : 98m/s
2
(10G)
Frequency : 20~200 Hz
Direction
: X, Y, and Z, 3 directions
Testing Time : 120min for each direction
Shock
No malfunction shall be occurred with 980m/s
2
(100G) for ±X,±Y, and ±Z,
6 directions.
(35)
Operation Environment
Operation
guaranteed
- 5 ~
+ 45℃
Humidity 20 ~ 80%RH with no condensation
(36)
Storage Environment
Storage Temperature: -25~
+ 60℃
, Humidity 20 ~ 80%RH with no condensation.
<3G-SDI output Level A and Level B>
The difference between Level A and Level B is the way of mapping Y signal and Cb/Cr signal onto 3G-SDI standard signal.
The difference does not affect the resolution of the video signal. Some 3G-SDI receivers correspond to either Level A or B,
whereas other receivers correspond to both Levels, so please set the camera mode to match your 3G-SDI receiver.
