CIS VCC-5CL4M, Техническое описание и руководство по эксплуатации

Страница: 26 / 36

VCC-5CL4M Rev.905-0060-04
©2016 CIS Corporation. All rights reserved.
25
□
Frame rate = 1 / (Total line count per frame × Time for 1 line)
Time for 1 line
Camera Mode Time for 1 Line
2Tap Base configuration mode 16.633μs
3Tap Base configuration mode 11.111μs
4Tap Medium configuration mode 8.350μs
8Tap configuration mode 4.175μs
□
Setting Examples
Effective Frame rate (Entire frame lines)
Lines 2Tap mode 3Tap mode 4Tap mode 8Tap mode
4 (Min.) 4 H fps (H) fps (H) fps (H) fps (H)
・ ・
1202.4 50 1800 50 2395.2 50 4790.3 50
Vertical:
VGA equivalent
480 H fps (H) fps (H) fps (H) fps (H)
・ ・
114.3 526 171.1 526 227.7 526 455.4 526
Vertical:
XGA equivalent
768 H fps (H) fps (H) fps (H) fps (H)
・ ・
73.9 814 110.6 814 147.1 814 294.2 814
Vertical:
SXGA equivalent
1024 H fps (H) fps (H) fps (H) fps (H)
・ ・
56.2 1070 84.1 1070 111.9 1070 223.8 1070
Vertical:
UXGA equivalent
1200 H fps (H) fps (H) fps (H) fps (H)
・ ・
48.3 1246 72.2 1246 96.1 1246 192.2 1246
2048 (Max.) 2048 H fps (H) fps (H) fps (H) Fps (H)
Full frame 28.7 2094 43.0 2094 57.2 2094 114.4 2094
□
The line numbers at partial scan setting can be set from 4 lines. Only multiple numbers of 4 can be set.
□
The effective line numbers of the manual shutter setting value at partial scan setting become the maximum.
□
When partial scan setting is set to ON or OFF, the coordinates of a cursor is reset to (0, 0).
□
Changes to partial scan setting (Address 50) shall be done when partial scan setting is OFF.
□
When you switch between Full Frame Scan Mode and Partial Scan Mode or when you change Partial scan settings,
the
first one frame right after the changes shall be invalid.
*Especially at fixed trigger shutter mode and pulse width trigger shutter mode, input a dummy
trigger first, and use the next trigger as an actual video signal.