VCC-5CL4M
Rev.905-0060-04
©2016 CIS Corporation. All rights reserved.
10
Function
Address
Data
Description
Serial communications
Baud rate selection
※I NI T Com m and is excluded
14
0
9,600 baud
1
115,200 baud
Black level adjustment
16
0 ~ 100
Black level adjustment
(To be restored to the factory settings with INIT command).
Gain
20
0
0dB fixed gain
1
+ 6dB fixed gain
2
+12dB fixed gain
3
+18dB fixed gain
4
+24dB fixed gain
5
+30dB fixed gain
6
+36dB fixed gain
11
Manual gain (Refer to the address 21)
Manual gain
21
0 ~ 480
0 ~ +48dB
(1dig=0.1dB)
Shutter
23
0 ~ 15
Preset shutter
(Refer to Section 5.1. The List of Preset Shutter)
16
Manual shutter (Refer to the address 24)
Manual shutter
24
1 ~ 2048
1line/step (Refer to Section 5.2. Formula to Calculate
Manual Shutter Values)
Manual shutter at FAST trigger
14 ~ 200,000 Specify exposure time with μs (approximate value).
Refer to the manual shutter settings of FAST trigger mode
(CLK sync. mode).
Vertical partial (lump settings)
50
3 parameters The 1
st
parameter: Partial number (0~7)
The 2
nd
parameter: Start line (0~2044 per 4 lines)
The 3
rd
parameter: Effective line numbers (4~2048 per 4
lines)
1 parameter
at acquisition
Specify the partial numbers (0~7).
Vertical partial mode
54
0
OFF
1
Reflect the value set by the address 50, then set vertical
partial ON.
Factory settings
INIT
None
Restore the settings to the factory settings.
Data save
SAVE
None
Save the camera settings.
White defect detection by users
100
2 parameters Detect the later occurred white defects and register them.
Addition of defect pixels by users
101
2 parameters Register the defective pixels specified with (x, y).
Deletion of defect pixels by users
102
2 parameters Delete the defective pixels specified with (x, y).
Complete deletion of defect pixels
by users
103
1 (fixed)
Delete all the defect pixels detected and registered by the
user.
