VCC-5CL4M
Rev.905-0060-04
©2016 CIS Corporation. All rights reserved.
11
Function
Address
Data
Description
Indication of defect pixels
104
0 at set up
Turn OFF the indication of bright point
1 at set up
Indicate the position of the correcting pixel with lighting.
1 at setup
Indicate the list of data at ex-factory and the registered
data by the user.
2 at setup
Indicate only the list of the registered data by the user.
3 at setup
Indicate the registered number of the defect pixels per
reed.
4 at setup
Line up and indicate the registered number of the defect
pixels per reed.
User data settings
200
2 parameters
All 0xFF at
ex-factory
Set any data for the user area (32 byte).
Save with SAVE command.
※Do not set any address or data other than specified the above.
