10. You should now be on the Dlink home page. Click on LAN
11. Type in the IP address that is on the access point (cirus sticker) or a new open
address from your IT administrator.
12. Make sure the subnet is set to 255.255.240.0; set the gateway to 192.168.96.1. Click
on Apply followed by continue. The main page should now be present.
Configuration is now complete.
Useful Terms to Know
You’ll find these network terms throughout this manual. As an installer of Cirus Controls
Drive by Download
TM
systems, a simple explanation of “all those numbers” and what
they mean is a useful tool while setting up systems. As such this guide is not designed to
give the reader a complete understanding of all the systems and protocols associated with
Internet Protocol networking, just a basic understanding of the settings affected by
installing a
Drive by Download
TM
system.
IP Address
Rev C
Page 17
11/30/2011
Copyright © 2011 by Cirus Controls, LLC. All Rights Reserved. No part of this material may be
reproduced in any form without the express written permission of Cirus Controls LLC.
The Internet is a collection of individual networks tied together. Each of these smaller
networks is called a subnet (more on this later). Inside each subnet, all networked
components (computers, bridges, spreader units, etc) have an address that differentiates
those components from each other. It is required that all networked components inside a
subnet have a
unique
address. This allows the other components in that subnet to
identify who is “talking”. The address is typically expressed as a
dotted quad
address.
It looks like four numbers from 0 to 255 separated by periods. An example would be
172.154.23.58. The addresses of a subnet must be similar to each other if the components
are to communicate with each other.
