a.
Set an IP address into the computer from the “
Configuring the computer to talk to the
Bridge/Access Point
” section and disable the computer internal wireless card.
b.
Open the Airborne Management Center Icon under programs.
c.
Group logon will come up type in “dpac” for the Group Password
d.
Click “yes” to manage these new devices
e.
Click “yes” for these systems are using factory default settings
f.
Under the tree view you should see an IP address of 169.254.2.100. This is the
CC501 bridge. Right click on OEM-cfg-1, followed by connectivity tools->launch
web browser
g.
Type “dpac” for username and password
Rev C
Page 14
11/30/2011
Copyright © 2011 by Cirus Controls, LLC. All Rights Reserved. No part of this material may be
reproduced in any form without the express written permission of Cirus Controls LLC.
NOTE
: If the system does not show your device, make sure it is
powered up and verify the steps in “Configuring the computer to talk to
the Bridge/Access Point” section.
