Cirrus Logic ARM CDB89712, Руководство пользователя

Страница: 33 / 46

CDB89712
5-2 DS502UM2
Wakeup. The board is now ready to use.
5.1.1.2. Installing the Green Hills tools
To install the Green Hills tools, run Setup.exe from the root directory on the CD-ROM and follow
the on-screen directions.
5.1.1.3. Memory map
Table 4-5, “Memory Map for the CS89712 Microcontroller, Booting Ice_boot,” shows the memory
map once Ice_boot has been loaded.
5.1.2 ARM Software Development Toolkit
Included in the CD-ROM is a 60-day evaluation copy of the ARM SDT version
2.50. This software contains the Project Manager, C Compiler, Assembler, Linker,
Debugger, and ARM instruction set emulator.
There are two applications that are used to build and debug applications:
l
ARM Project Manager
—
The ARM Project Manager is used to develop and build applica-
tions for the CS89712 development board.
l
ARM Debugger
—
The ARM Debugger is used to debug applications on the CS89712
development board.
These applications are described fully in the online manuals, but brief instructions for the basic use
of these applications is provided in the following sections.
This chapter describes how to use the Project Manager and ARM Debugger to build and debug an
application.
5.1.2.1. Installing the ARM SDT
To install the ARM SDT run Setup.exe from the SDT250 directory on the CDROM and follow the
on-screen directions.
If you are unfamiliar with the ARM SDT, select the online manuals as one of the components to
install. The SDT will have minor problems if it is installed into a directory path that contains a space
character; therefore, we recommend that you to
not install the SDT into the Program Files directory.
Caution: The evaluation version of the SDT will create a seemingly useless directory called
"c_dilla"; do not remove this directory or its contents or the development version
of the SDT will no longer work, will not un-install correctly, and will not be able to
be installed again on your system.
5.1.3 LynuxWorks’ BlueCat
A full version of the enhanced BlueCat tools is included in the CDB89712 Development Kit. To
install the BlueCat tools refer to the documentation in the BlueCat Tool Kit. Lunuxworks provides
30 days of free BlueCat installation support for the CDB89712. Contact www.lynuxworks.com for
details.
5.1.4 Angel Debug Monitor
The example software (See the Samples directory on the Development Kit CD-ROM) provided in
the development kit is designed to run under control of the Angel debug monitor from ARM. In order
to allow the sample code to handle the IRQ interrupt, the version of Angel provided with the
development kit (based on Angel 1.2) has been slightly modified to allow the interrupt to be hooked
by application code. The Angel software is distributed on sixty CD-ROM, in the sixty directory.