Circutor Getest, Инструкция по эксплуатации

Страница: 15 / 24

GETEST
Page 15 of 24
6.3.- START-UP
1.- Connect the measuring cables (2) and the current injection cables (3), depending on the
measurement you are going to take.
2.- Connect the power supply cable (7) to the MPC and to the mains socket. The device is
designed to operate with 230 Vac. 50/60 Hz. Please ensure that the voltage is correct before
plugging in the device. The device is protected from overvoltage with a F250 mA fuse
Note: Connect the device to a line or generator capable of supplying the required power:
Required power
≥
(600 V x current to be injected)
3.- Flip the switch (6). The red LED will light up.
4.- Before connecting the telephone and unit via Bluetooth, we first have to link the Getest unit to
the telephone as follows:
Touch the following icon on the phone's main screen which will take you to settings
5.- Select the "Wireless connections" option. Activate Bluetooth and then click on the "Scan for
Devices" option. The telephone will detect the switched-on Getest unit with the name
ESD100v1.1.0. Click on that name and wait for the blue "Linked" message to appear.