Circutor DH96-CPP, Руководство пользователя

Страница: 3 / 22

Auxiliary supply:
Display :
Input circuit:
Isolation:
Environmental conditions
General characteristics
Relays features 1 single contact
Design standards:
IEC 1010 / IEC 348 / IEC 664 / EN50081-2 / EN50082-2 /ANSI C12.5-1978/ UL508/
C22.2 No 14 / VDE0435
Rated value: 115V or 230 V a.c. / 24 or 48 V a.c.
(-15 %, +20 %)
Frequency range: 45 to 65 Hz
Burden: 4 VA (without optional card)
7 VA (maximum burden)
7 segments
14 mm high 4 digits
Hi-efficacy red colour
Overrange indication "----"
8 indication LED
Programmable decimal point
Free contact:
Vc 5 V
Rc 3,9 k
TTL / 24V:
Rc 47 k
Logic Level 0 < 2 V
Logic Level 1 > 3 V
NPN or PNP sensor:
Rc 2 k
Logic Level 0 < 2 V
Logic Level 1 > 3 V
Between the input circuit, the measuring circuit and the output measure-relay, RS 485 /232
Test voltage:
3 kV RMS 50 Hz during 1 min
Pulses test: 4 kV (1.2/50 µs)
:
Storage temperature: -40 ºC to +70 ºC
Operation temperature: -10 ºC to +65 ºC
:
Dimensions: 96 x 48 x 138 mm
Weight: 550 g
Case material: ABS V0, anthracite grey
Protection degree: Frontal: IP 54
IP 65 with frontal protect
Case: IP 20
Terminal: IP20
:
Rated A.C. current : 5 A
Maximum A.C. current: 250 V a.c. 50 Hz
Maximum resistance load: 750 VA
Isolation resistance 500 V: > 1000 M
Contact-coil isolation: 2000 V c.a.
Contact-contact isolation: 750 V c.a.
Mechanical endurance: > 20.000.000 operations.
Electrical endurance: > 30.000 operations at 5 A. and 250 V
W
W
W
W
Page 3
Chapter
1
Device
information
Technical specifications