Circutor CVM-D41 DC, Инструкция по эксплуатации

Страница: 49 / 60

49
Instruction Manual
CVM-D41 DC
6�3�6�3� Analog output
Table 56:Modbus memory map: Analog output
Analog output
Parameter Format Address Valid data margin
Type of output int 817
Current output model:
0:
4 ... 20 mA -
1:
0 ... 20 mA -
2:
4 ... 12 ... 20 mA
Voltage output model:
7:
0 ... 10 V -
8:
2 ... 10 V
Analog output parameter int 814
0: Voltage
3: Current
6: Power
Reading for the end of the analog out-
put ( fs )
int 815 0.5 x A
(2)
< fs ≤ 1.2 x A
(3)
Reading for the start of the analog
output (
ds
)
int 816 0
(4)
≤
ds
≤ 0.5 x
A
(2)
(2)
A
: The value of the
A
variable varies depending on the
analog output parameter
programmed, see
Table 23
.
(3)
PT-1 x CT-1 for power measurement. 1.2 x A for voltage and current measurement.
(4)
0000 V for the analog output of the voltage measurement, 00.00 A for the current measurement and 00.00 kW for the
power measurement.
6�3�6�4� Relay outputs
Table 57:Modbus memory map: Relay outputs
Relay outputs
Parameter Format Address Valid data margin
Relay 1: mode int 820
2: Ouput disabled
1: Alarm output
0: Remote control output Relay 2: mode int 826
Relay 1: pulse duration int 821
000.0 ... 999.9 s
Relay 2: pulse duration int 827
Relay 1: Alarm parameter int 822 0: High voltage alarm (
U--H
)
3: High current alarm (
i--H
)
8: High power alarm (
p--H
)
12: Alarm when digital input 1 is connected
(
di1H
)
13: Alarm when digital input 2 is connected
(
di2H
)
16: Low voltage alarm (
U--l
)
19: Low current alarm (
i--L
)
24: Low power alarm (
p--L
)
28: Alarm when digital input 1 is disconnected
di1L
)
29: Alarm when digital input 2 is disconnected
(
di2L
)
Relay 2: Alarm parameter int 828
Relay 1: connection delay int 823
000.0 ... 999.9 s
Relay 2: connection delay int 829
Relay 1: alarm value int 824
0000 ... 9999
Relay 2: alarm value int 82A
Relay 1: hysteresis int 825
Relay 2: hysteresis int 82B