Circutor CVM-D41 DC, Инструкция по эксплуатации

Страница: 30 / 60

30
CVM-D41 DC
Instruction Manual
5�3�2�- ANALOG OUTPUT PARAMETER
This screen is used to configure the parameter that is acted upon by the analogue output.
itEn
-
U
Use the key to browse the different options.

Configuration values
Table 21: Configuration values: Analog output parameter�
Analog output parameter
Possible values
U
, Analog output of the voltage measurement.
i
, Analog output of the current measurement.
P
, Analog output of the power measurement.
To validate the data, press the key.
Use the and keys to browse the configuration screens of the menu.
5�3�3�- READING FOR THE START OF THE ANALOG OUTPUT
In this screen, the reading value from which the analog output is started is configured.
ds 0000
V
Use the , key to modify the value of the flashing digit
When the desired value is shown on the screen, press the key to skip the digit.

Configuration values
Table 22: Configuration values: Reading for the start of the analog output�
Reading for the start of the analog output
Minimum value
0000 V, For the analog output of the voltage measurement.
00.00 A, For the analog output of the current measurement.
00.00 kW, For the analog output of the power measurement.
Maximum value 0.5 x A
Note:
The value of the
A
variable varies depending on the
analog output parameter
programmed, see
Table 23
.