Circutor CVM-D41 DC, Инструкция по эксплуатации

Страница: 35 / 60

35
Instruction Manual
CVM-D41 DC
5�4�5�- ALARM VALUE
The display value for voltage, current or power after which the alarm will be activated is configured on
this screen. The value is programmed in absolute values.
uALE 1200
V
Use the , key to modify the value of the flashing digit
When the desired value is shown on the screen, press the key to skip the digit.

Configuration values
Table 29: Configuration values: Alarm value�
Alarm value
Minimum value 0
Maximum value 9999
To validate the data, press the key.
Use the and keys to browse the configuration screens of the menu.
5�4�6�- HYSTERESIS
This screen is used to configure the hysteresis value, i.e., the difference between the alarm connection
and disconnection value.
HyS 0005
V
Use the , key to modify the value of the flashing digit
When the desired value is shown on the screen, press the key to skip the digit.

Configuration values
Table 30: Configuration values: Hysteresis�
Hysteresis
Minimum value
0
Maximum value
9999
To validate the data, press the key.
Use the and keys to browse the configuration screens of the menu.
5�4�7�- SAVE CONFIGURATION
To save the configuration of the device, follow the steps indicated in section
“5.1.7.- SAVE CONFIGURA-
TION”
�